Mafra Foam Gun Prewash
Rs. 2370For Inquiry
Product Specification
- Producer: Mafra
- Brand: Ma-Fra
- Item weight: 1.16 kg
- Product dimensions: 10 x 6 x 15 cm; 1.16 Kg
- Item model number: MF88
Delivery Options Available
- 2-3 Days Normal Delivery
- 24 Hours Express Delivery
Sold By
GW002Warranty
NOEasy Return
Available, T&C ApplyDescription
- Foam Fun Prewash from Mafra's Maniac Car Detaling Line is a powerful and safe dry and compact foam foam gun for use in the pre-wash phase.
- This product, when used in combination with a pressure washer, eliminates 90% of dirt, thus preventing swirls or micro-scratches in the subsequent washing phases.
- Foam Gun Prewash can be used frequently because it respects the previously applied protective agents, including nanotechnology-based protective products or coatings.
- Foam Gun Prewash is recommended for use through a foam gun but can be used as an excellent prewash with a hand sprayer.
Recommendations:
- Make sure the vehicle surface is cold and that the car is away from direct sun;
- Before using the product, rinse the vehicle to cool the surface or remove dirt;
- Dispense the product from the bottom upwards; - do not allow the product to dry on the surface.
How to use:
- With Foam Gun: in winter dilute 1: 5 (1 part of product and 5 of water), to make a final dilution of 1:50 at the outlet, and in summer 1:10 (1 part of product and 10 of water), to make a final dilution of approximately 1: 110 at the outlet, once the solution has been obtained, pour into the vehicle and leave to act. Proceed to rinse the vehicle.
- With low pressure manual pump: In winter dilute 1:50 (1 part of product and 50 of water) 2 caps in 1 liter of water, In summer dilute 1: 100 (1 part of product and 100 of water ) 1 cap in a liter of water. Once the solution is obtained, dispense the product from the bottom upwards and leave to act. Proceed with rinsing the vehicle from top to bottom.