Penetron Crystalline waterproofing Coating-22.7KG
Write a Review

Rs. 8725

Condition: New
Weight: 22.7kg
Consumption: 1.4 kg per SQM
Becomes an integral part of the concrete
Can be applied to all structurally sound concrete
– new or old
Penetrates deeply and seals concrete’s capillary
tracts and shrinkage cracks
Can be applied from either the positive or
negative side
Waterproofing and chemical-resistance properties remain intact even if the surface is damaged
Completely effective against high hydrostatic
pressure
More effective overall and less costly than
hydrolytic membrane or clay panel systems
Easy to apply, labor-cost effective
Increases concrete’s compressive strength
Will not come apart at the seams, tear or be
punctured
Does not require protection during backfilling,
placement of steel or wire mesh, and other
common procedures
Seals hairline and shrinkage cracks up to 1/51”
(0.5 mm)

Note: *2 coats recommended

View More details

PT017

Available, T&C Apply

PENETRON® is a surface-applied, integral
crystalline waterproofing material, which
waterproofs and protects concrete in-depth. It
consists of Portland cement, specially treated
quartz sand and a compound of active chemicals.
PENETRON® needs only to be mixed with water
prior to application.
When PENETRON® is applied to a concrete
surface, the active chemicals react with moisture and the by-products of cement hydration to cause a catalytic reaction that generates an insoluble, crystalline structure.
These crystals fill the pores and minor shrinkage cracks in the concrete to prevent any further water ingress (even under pressure).
However, PENETRON® will still allow the passage of vapor through the structure (i.e.
the concrete will be able to “breathe”). Even after the concrete has cured, PENETRON® remains dormant in the concrete and will reactivate in the presence of moisture to seal capillary tracts and hairline cracks

0 out of 5 Based on 0 Ratings

Have you used this product before?

Rs. 8210

Rs. 8545