20Kg Sika Coolcoat
Product Not Available
Product Specification
- Appearance /Colours Sika® CoolCoat: White and Grey Shade(Can be stained with good quality stainer for light shades). Pre-test for over
paintability and paint compatibility are recommended. - Storage Conditions/ Shelf-Life: Best before 12 months if stored properly in undamaged and unopened original
sealed packaging in dry and cool conditions. - Chemical Base: Acrylic polymer dispersion
- Density Sika® CoolCoat: ~1.35 kg/l at 27o C
- Film Thickness: 340 - 360 microns (DFT)per coat, minimum three coats recommended for optimum performance)
- Layer Thickness: With Sika® Fab-1 ~1.2 mm
- Solid Content: ~ 66 % (by weight)
- VOC: < 10 gm/l Complies to Green building standards
- Adhesion Strength on cement after 14 days curing: ≥ 1.5 N/mm
- Tensile Strength: 1.5 MPa
Crack bridging properties: 3.2mm - Water Absorption (% by Mass): < 10 %
- Water Vapour Transmission: 23 g/m2/ 24h
- Resistance to Alkali (10% NaoH after 24hrs): Satisfactory. No sign of cracking, flaking,
blistering or any other failure was observed
Delivery Options Available
- 2-3 Days Normal Delivery
- 24 Hours Express Delivery
Sold By
PT030Warranty
NOEasy Return
Available, T&C ApplyDescription
Sika® CoolCoat is a flexible, liquid applied, single component, ultra violet rays and
weather resistant, acrylic waterproofing membrane for all types of exposed roof
slabs(new and old),terraces(sloped and flat),etc..
Sika® CoolCoat contains Cross-linking polymers, Special Glass Micro fibers,
pigments and advanced antifungal additive that provides long lasting tough water
proofing membrane.
The low thermal conductivity of the membrane serves as insulation medium to
resist heat transfer.
The long lasting glossy white colors reflect solar radiation that helps heat to back
into the atmosphere which keeps the interior of a building cooler.
This coating combines the benefits of waterproofing as well as heat reduction in a
single product. Thus ensuring value for money for customers.
The waterproofing system can be further reinforced using Sika® Fab 1 glass fibre
mesh.
Uses:
- Suitable for all types of:
- Roof slabs(flat and sloped)
- RCC/ asbestos/ lime terraced roofs, etc. after suitable surface preparation and
repairs - Sunshades
- Suitable for repairing existing bituminous membrane
- Can be used as exterior coating for PVC water tanks exposed to direct sunlight
on roofs. to keep the inside water temperature relatively cooler, - Extended walls, balconies,
Characteristics /Advantages:
- Cross linking polymer gives excellent weather resistance and enhances service
life. - High solar reflectance index (SRI) indicates high degree of cooling effect
- Crack-bridging
- High resistance to chloride penetration, hence highly suitable for saline
environment. - Algae and fungi resistant
- Highly Flexible
- Water vapour permeable
- Simple and fast application (even at detailing)
- Excellent adhesion to concrete, brickwork, corrugated asbestos, asbestos
cement sheet and metal decks - Ultra violet rays and weather resistant
- Water based hence eco friendly
