Sika Latex Power 5kg SBR Based Multipurpose Polymer for Waterproofing and Repair
Rs. 6485For Inquiry
Product Specification
- Appearance / Colour: White (milky) liquid
- Packaging: 5kg
- Storage; Storage Conditions /
- Shelf Life: 18 months from date of production if stored in undamaged and unopened, original
sealed packaging, in dry conditions and protected from direct sunlight. Protect from
frost. - Chemical Base: Styrene butadiene rubber emulsion.
- Density: ~ 1.02 kg/l at 27oC
- Solid Content: ~ 40 % by weight
- Substrate Quality: Clean and dry, homogeneous, free from oils and grease, dust and loose or friable
particles. Paint, cement laitance, old coatings and any other contaminants. - Substrate Preparation: Cementitious substrates should be pre-saturated surface dry with clean water.
Delivery Options Available
- 2-3 Days Normal Delivery
- 24 Hours Express Delivery
Sold By
PT030Warranty
NOEasy Return
Available, T&C ApplyDescription
Sika® Latex Power is a synthetic rubber emulsion which when added to cement
slurry/ cement mortar/concrete/grout provides good adhesion and water resistance.
It comes in the form of a milky liquid. It is fully soluble in water and is to be added
directly to the gauging water of mortar/concrete/ cementitious grout.
Uses:
- For waterproofing of roof slabs, sunken slabs, basements, water tanks, sunshades etc. in combination with cement
- As a bonding agent for uses in repair and plastering
- For making polymer mortar for repairs mortars etc.
- Treatment for leaching and saltpetre action
- Multipurpose mortar admixture for injection grouts
Characteristics/Advantages:
- Improves elasticity, flexibility, tensile strength of cement and reduces cracking
- Makes the mortar waterproof and reduces susceptibility to acids and gases, salt petre action etc.
- Mortar with Sika® Latex Power shows extremely good bonding to bases like concrete, stone, brick etc.
- Reduces viscosity of cement injection grout and improves bond of cured injected materials with substrates
- Sika® Latex Power can be diluted with water (1 : 4 - 6) depending on the type ofapplication
- Screed required with Sikacim® / Sika® Plastocrete Super to protect waterproofing layer
- Standard coating system can be further reinforced by placing Sika Fab 1 fabric
layer in between 1st and the 2nd coat.
